KATflow 150
Advanced Clamp-On Ultrasonic Flowmeter


The KATflow 150 is the premier product for flexibility and performance, providing the user with a comprehensive specification and a list of configuration options. The practical modular design and the wide variety of different transducer types available ensure this instrument is suitable for everything from simple water flow measurements to energy flow monitoring and automated process control.

Pipe Diameter 10 – 6,500 mm
Fixed Installation
Heat Quantity Measurement
Mains Operated
Internal Data Logger
Process Outputs

The KATflow 150 is an advanced ultrasonic flowmeter for permanent installation. The dual-channel design allows the user to either save cost and time by performing two independent measurements simultaneously or to install two pairs of transducers on a single pipe for locations where there are non-ideal flow conditions. Where this is used the sum, difference, average and maximum calculations are available in order to provide further processing of the data.

  • Dual flow monitoring with sum, average, difference and maximum calculations
  • Process outputs including current, open-collector, relay
  • Communication options RS 485, Modbus RTU and HART* compatible output
  • Current inputs for temperature, pressure and density compensation
  • Up to 100,000 measurement data logger and software for sampling and data transfer
  • Optional heat quantity (thermal energy) measurement functionality

* HART® is a registered trademark of the HART Communication Foundation

  • Pipe diameter range 10 mm to 6,500 mm
  • Temperature range for sensors -30 °C to +250 °C (-22 °F to +482 °F), higher temperatures available on request
  • Lockable and sturdy IP 66 polycarbonate flowmeter enclosure
  • Selectable three-line LCD display and full keypad
  • Measurement of two flows simultaneously
  • Up to ten input or output slots available

Manufacturing and Process

Cooling systems on injection moulding machines

Measurement of paint flows

Fire pump control

Water and Wastewater

Dual-pipe metering for cost saving

Replacement of large bore electromagnetic flowmeters

Effluent metering

Building Services

Installation on hot water lines

Dual-channel energy flow measurement

Installation on chilled water systems


Demineralised water measurements

Control of hydrofluoric acid flows

Measurement in clean room environment


Water for injection measurement

Measurement of sterile fluids

Clean in process (CIP) system monitoring

General Industry

Automated process control

Measurement of furnace cooling flows

Fuel and oil consumption measurements

Building Services
Water and Wastewater
Manufacturing and Process
Power Generation